Set Up Instructions
- Increase droplet size & amount of liquid dispensed to reduce drift by removing the “inner mat” under the caps on mist nozzles
- If mist is exceeding the blower tube and not being directed by the blower power, then use the push connector turn valve and slow the flow down which will fix the problem.
Application Tips
FAQs
WARNING
DO NOT USE MIST PRO (FORMERLY MOSQUITO SNIPER SYSTEM) WITH:
FLAMMABLE PRODUCTS (GASOLINE, DIESEL FUEL, HYDRAULIC OIL, ETC.), HOT or BOILING LIQUIDS, HIGHLY VISCOUS (THICK) MATERIALS (TAR, HIGH-SOLID PAINT OR STAIN), PAINT & STAINS, CITRUS BASED CLEANER, STRONG ACIDS or BASES, STRONG SOLVENTS, LACQUERS, TURPENTINE, PRODUCTS CONTAINING PEANUT OIL, BLEACH, EPSOM SALT, MINERAL SPIRITS, VINEGAR, ESSENTIAL OILS
These products can damage the system, ignite, or explode, causing serious injury.
Do not exceed 45 PSI with the tank sprayer.
Do not inhale chemical fumes or sprayed mist. Avoid contact with skin or eyes. Wear appropriate protective clothing and devices including mask, goggles, and gloves when working around concentrate or diluted chemical mixture. Chemical causes eye irritation and is harmful if swallowed, inhaled, or absorbed through the skin.
Always inspect your system thoroughly before and after each use. Check to be sure hose is securly attached and in good condition before mixing the chemical in the tank. Test with water before using desired solution.
Do not spray on or near electrical installations.
Keep the work area clear of people and animals.
Never use the system during windy conditions.
Do not eat, drink, or smoke while using the system.
Wash face and hands with soap and water after filling or using the system.
Thoroughly clean and rinse tank and spraying assembly after each use.
Do not store system with solution in tank.
Do not transfer spray materials to other containers.
Keep spray materials locked up and out reach of children and animals.
Use only original manufacturer’s replacement parts.
Mix chemical and fill tank on open ground away from blower.
Only mix enough solution for your current application requirements.
MIST-PRO (FORMERLY MOSQUITO SNIPER SYSTEM) IS A DELIVERY SYSTEM, THE USER IS RESPONSIBLE FOR CHOICE OF SOLUTION & PERSONAL PROTECTIVE EQUIPMENT